Caring for your PROBAN® garments and fabrics couldn't be easier. They can be washed using conventional methods or industrial laundering - they can even be dry cleaned.
| Although PROBAN® fabrics are rigorously tested for flame retardant performance and durability to washing – they will only perform as intended if they are looked after correctly. PROBAN® fabrics can be washed using conventional methods or acid sour treatments, commonly used in industrial laundering. |
![]() |
Dry cleaning PROBAN® finished fabrics can also be dry cleaned, although a wet wash is recommended at intervals to prevent the gradual build up of deposits. A fresh solvent liquor in the final rinse is also good to prevent the re-deposition of dirt removed during dry cleaning.
Wash factors to be avoided
Detergents based on soap containing formulations, or those containing sodium
silicate or metasilicate, should not be used when the wash or rinse water
hardness level is greater than 3° Clark (45ppm calcium carbonate). This
minimises the formation of harmful calcium and magnesium silicates, which can
have a detrimental effect on flame retardant fabrics.
• If fabrics have been incorrectly laundered,
calcium or magnesium soap deposits can often be removed in commercial
laundering by use of an acid sour acetic acid rinse, followed by alkaline
neutralization.
• Chlorine bleaches should NOT
be used as they chemically weaken the polymer. If a bleaching treatment
is necessary, fabrics should be soaked in dilute cold hydrogen peroxide
liquor. Care should be taken to exclude the presence of metal ions, which
can catalyse strong oxidising agents such as hydrogen peroxide.
• Stains can be removed by pre-soaking
using a biologically active detergent. Detergents which contain high concentrations
of perborate based bleaches require attention to washing temperature,
particularly if the detergent formulation contains a perborate activator
such as TAED. When laundering in the presence of high sodium perborate
concentrations in combination with an activating agent, it is advised
that the normal domestic wash temperature for fast coloured cottons of
60° should be used.
• To ensure the complete removal
of excess detergent and other washing auxiliaries, garments manufactured
from blends of cotton with polyester (cotton-rich) should be efficiently
rinsed on completion of washing.